Penlight and 12v power generator

[dazthechippy]

so would it be possible to run a few led lights off this set up, say 2/3 ??

dont know much about leccy but i think these leds are very low voltage?

cheers

[Memphis]

Thanks andy that clears it up nicely, the inverter wont be getting used. Im trying to figure out if i could use this charger to then power the radios being discussed on the other threads on here, so the battery will put out 24v, does that mean itll put out a certain amount of amps? Or will it fluctuate?
I am going to read that battery university link you sent but id like to hear it from yoyr point of knowledge rather than my possible misinterpretation

Sent from my GT-N8010 using Tapatalk

[Yorkshire Andy]

With it been 24v in its current configuration you would want 24v lamps..... A HGV shop would be ideal


http://m.ebay.co.uk/sch/i.html?_nkw=24v ... 2.X24v+led


This is 12v but I you can get it in 24v

viewtopic.php?f=14&t=10464

http://m.ebay.co.uk/itm/180811244734?nav=SEARCH

A lot of newer car accessories phobe chargers and such are multi voltage

If its the beofeng radios your referring to:

http://www.446shop.com/views.asp?hw_id=269

Ampage shouldn't be an issue for these its the voltage in the first instance which will fry stuff made for say 12v

Then all you would need to do is add a car style lighter socket and your good to go