Cold weather and lighting a fire

UK Preppers introduction and forum rules
RobRAF
Posts: 3
Joined: Thu Dec 29, 2016 9:45 am

Cold weather and lighting a fire

Post by RobRAF »

Morning all

I'm new to the Forum but not to Prepping so I thought I'd start to share initial thoughts this cold late Dec AM. Many of you probably will know about this tip but some might find my musings of benefit. I'm ex RAF and have picked up a few survival tips over the years and thought to share. I'm based near Basingstoke so if anyone is local just let me know.

Here goes. I went down to the log cabin today to get a fire stoked and a brew on - in-laws were doing my head in over the Christmas break grrr. Try as I might my lighters wouldn't work. DOH - of course they won't! Butane won't 'boil off' and turn to gas at these low temperatures. So Turbo Flames can be temperamental - but the one I use is usually quite good. Not today. Neither was the household long nose lighter I'd left near the firewood. It took me 20 mins in a pocket to get the gas warm enough to light. So the upshot is - when it is uber cold (2.4 deg in there this am) - always have some storm matches as back up or keep lighters in a 'close to body' pocket. 20 mins is a long time to wait for a brew in a cold environment - and that's before you get heat into your fire. Lack of fire will drop morale and could be the difference between life and death. Speak soon! RobRAF.
User avatar
Deeps
Posts: 5797
Joined: Sun Nov 09, 2014 8:36 pm

Re: Cold weather and lighting a fire

Post by Deeps »

Welcome to the forum, could you post a quick intro in the 'New Members Start Here' section. I hope you find the forum helpful.
User avatar
sethorly
Posts: 389
Joined: Sun Jul 17, 2016 6:33 pm

Re: Cold weather and lighting a fire

Post by sethorly »

Ferrocerium rods work in the freezing cold. (The sparks are around 1650 degrees C.) They also work when it's raining or very windy.

edit/ For really pouring rain conditions a ferro rod with magnesium bar scrapings (igniting at 3000 degrees C) is supposed to work almost underwater (at that temperature water separates into oxygen and hydrogen and burns! - thnks Mr Mears for that info).
Last edited by sethorly on Fri Dec 30, 2016 10:39 am, edited 3 times in total.
=======
Plymton wrote:Klingon ass scratcher
=======
Area 8
=======
dazthechippy
Posts: 180
Joined: Fri Jun 07, 2013 7:47 pm

Re: Cold weather and lighting a fire

Post by dazthechippy »

cheers Rob, im between fleet and hook so up the road from you mate....
VonNoelio
Posts: 2
Joined: Mon Feb 17, 2014 9:02 pm

Re: Cold weather and lighting a fire

Post by VonNoelio »

Welcome Rob,

it's all down to relative boiling points. My understanding is butane needs the warmest temps then isobutane then propane to turn from liquid to vapour. I have had these problems when I first had my Jetboil out whilst working on sea cliffs in February, had to put my ice cold butane cannister down inside my trousers to warm it up :o


So now go for a mix of the other two.

I don't know if you can get isobutane/propane for lighters??

Cheers
RobRAF
Posts: 3
Joined: Thu Dec 29, 2016 9:45 am

Re: Cold weather and lighting a fire

Post by RobRAF »

Cheers guys - good to 'meet' you.... RobRAF
User avatar
itsybitsy
Posts: 8508
Joined: Sat Nov 27, 2010 5:51 pm
Location: East Yorkshire

Re: Cold weather and lighting a fire

Post by itsybitsy »

I'm locking this thread. Rob, as per Deeps' request, please post an introduction in the New Members start here section. Once you have done this, we will then look at your other posts in the mod queue.