Renewable candle

Kit, Clothing, Tools, etc
Rearfang

Renewable candle

Post by Rearfang »

image.jpg
image.jpg (69.67 KiB) Viewed 1134 times
As candle melts new one is formed don't know where to get one be intreasted to know
redskies
Posts: 1551
Joined: Mon Jan 07, 2013 12:35 am

Re: Renewable candle

Post by redskies »

I saw this on FB and did a bit of poking about. They're not available as yet, but I'm hoping they will be in the future, cos it's a brilliant idea.

You'll have to add wax eventually, because each time it 'regenerates' it loses a little.
ForgeCorvus
Posts: 3280
Joined: Fri Feb 08, 2013 11:32 pm

Re: Renewable candle

Post by ForgeCorvus »

I don't understand how it works
If you've got the right sized wick and the candle isn't in a draft then theres no dribble or spillage.

If you haven't then you sort the problem not come up with a solution that isn't needed
jennyjj01 wrote:"I'm not in the least bit worried because I'm prepared: Are you?"
Londonpreppy wrote: At its core all prepping is, is making sure you're not down to your last sheet of loo roll when you really need a poo.
"All Things Strive" Gd Tak 'Gar
cpslashm
Posts: 325
Joined: Thu Jan 02, 2014 5:29 am

Re: Renewable candle

Post by cpslashm »

Um...

Tea light.

Cheap.

Refillable.

(Wax from around cheeses may be a bit smokey.)
SHTF around 2017.
grenfell
Posts: 4425
Joined: Thu Jul 04, 2013 7:55 pm

Re: Renewable candle

Post by grenfell »

Maybe I'm looking at it wrong but to me it looks as if the "regenerated" candle is the same or almost the same volume as the original candle :? If that's so then I want one of these perpetual candles :D As Forge says if the candle is made and used correctly then there should be very little left after burning.
User avatar
piglet
Posts: 276
Joined: Mon Dec 31, 2012 10:49 pm
Location: Mu Mu Land

Re: Renewable candle

Post by piglet »

ForgeCorvus wrote:I don't understand how it works
If you've got the right sized wick and the candle isn't in a draft then theres no dribble or spillage.

If you haven't then you sort the problem not come up with a solution that isn't needed
I have heard this also....if the correct grade of wick is used for the candle diameter size, spillage should be almost nil. But saying that I have bought candles in the past that spilt far more wax than they consumed. Usually slim table candles


I made my first candle yesterday (Paraffin wax - Approx 6" tall by 2" diameter)

So far, it has been burning continuously (to test) for 6.5 hours and has reduced by a little under 25%.
The flame is strong and bright and all the wax appears to be being consumed. Yes, I did get a little spillage, but adjusted the level and that stopped.

But I have noticed that the wick is not completely burning away and I have a couple of times trimmed the top during the burn.
I used a good quality cotton parcel string, bought in a DIY store, which was soaked overnight in a mixture of Borax and Salt. Then hung to dry and finally dipped once in wax.
Does it need dipping in wax? I did that because I read somewhere that you should?
The wick does smoke just a little.

I know its not a big deal, but I would prefer if all the wick was consumed, so wondered I anyone had any suggestions for a cheap and easily obtained wick material that may be more appropriate?
ain't settlin'
lonewolf
Posts: 1092
Joined: Fri Nov 15, 2013 11:49 am
Location: Ruby Country.

Re: Renewable candle

Post by lonewolf »

depends on the cost I suppose, I bought a candle the other day lasts for 90 hours and cost me 75P !!
Adapt or Die, there is no middle ground.