pico wind generator

Considering, or completed a DIY prepper project? Made something using traditional methods? Post it here!
gcp1975

pico wind generator

Post by gcp1975 »

here is my pico wind generator made from an old pc fan

sorry about the piccys will take more when i get reaquainted to MY shed
close up of coil , fitted to plastic from an old plastic blind.jpg
1st prototype - made of A4 card.jpg
i made this just to see if it would work ( lasted 2-3 mins but then fell apart !)
spay can hub with plastic milk bottle blades (note i got the pitch the wrong way).jpg
extra epoxy ( as wind destroyed original ) back to the drawing board !.jpg
finished prototype with an L.E.D attatched (just to test).jpg
shown without hub and blades

pics include a simple nail in the end of a piece of wood mast, and showing an L.E.D to prove that it worked..

i then added rectification and found that i can charge a poundland 1.2v rechargeable cell !! i know its not a lot but hopefully this project will get bigger !!!
gcp1975

Re: pico wind generator

Post by gcp1975 »

can anybody see the photo's ?
preservefreak

Re: pico wind generator

Post by preservefreak »

I can't, sorry :( sounds like a great project though and I'm looking forward to seeing more about it
gcp1975

Re: pico wind generator

Post by gcp1975 »

1st prototype - made of A4 card.jpg
1st prototype - made of A4 card.jpg (46.74 KiB) Viewed 3013 times
close up of coil , fitted to plastic from an old plastic blind.jpg
close up of coil , fitted to plastic from an old plastic blind.jpg (71.79 KiB) Viewed 3013 times
spay can hub with plastic milk bottle blades (note i got the pitch the wrong way).jpg
spay can hub with plastic milk bottle blades (note i got the pitch the wrong way).jpg (127.7 KiB) Viewed 3013 times
extra epoxy ( as wind destroyed original ) back to the drawing board !.jpg
extra epoxy ( as wind destroyed original ) back to the drawing board !.jpg (33.62 KiB) Viewed 3013 times
finished prototype with an L.E.D attatched (just to test).jpg
finished prototype with an L.E.D attatched (just to test).jpg (79.76 KiB) Viewed 3013 times
junmist
Posts: 1496
Joined: Tue May 08, 2012 5:39 am

Re: pico wind generator

Post by junmist »

looks good do you know how much power you get from it :? hang on I should ask how long does it take to charge a car battery, as soon as you start on amps I'm lost :oops:
AREA's 5-6 and 4
Feet the original All Terrain Vehicle
24942895
Posts: 146
Joined: Sat Feb 16, 2013 3:42 pm
Location: Cambridgeshire

Re: pico wind generator

Post by 24942895 »

Hmmm, I've got about 20 120mm pc fans in the cupboard... :-P

Sent from my GT-I9505 using Tapatalk 2
just a number, nothing to see here, move along now..
gcp1975

Re: pico wind generator

Post by gcp1975 »

junmist - you won't charge a car battery with it

I originally wanted to just charge aa/aaa batteries with it . a bit like a wind version of a solar freeloader !!

Gary
gcp1975

Re: pico wind generator

Post by gcp1975 »

24942895 - google pico wind generators and do what i did !!!!
TorNicho

Re: pico wind generator

Post by TorNicho »

The amount of power obtained isn't useless.

You know those little spinny-round things on the top of vans, I think they are there to trickle charge the battery for all the stop-starts they do. Correct me if I'm wrong. And I can't imagine those little things kick out that much.

Probably charge a mobile phone too, with the right circuit.

it's a shame about the design of fan because, if you could have the shaft spinning though several you would get a bit more out.
..............................n.......
|\...........................||......
|..\.........................||......
|....\.......................||......
|___-[]-[]-[]-[]-[]-[]-O>....
..............................||......
..............................||......
..............................||......
...............................u......

Sorry about the dots, this text editor removes the spaces when you do this.
Arzosah
Posts: 6471
Joined: Fri Jun 22, 2012 4:20 pm

Re: pico wind generator

Post by Arzosah »

How interesting! Thanks for taking the time to post these :)

I'm wondering about that card one, the first one - if you did it with sheets of plastic, the sort of thing you get stationery folders made from, I wonder if that would be sufficient to do the same trickle thing? It looks like an easier design, I *think*.

Will google pico wind generators :)